Original Mebay DC32D Small Diesel Generator Parts AMF Generator Control Module

 

This series of controllers is designed for the start, stop, parameter monitoring and fault monitoring of diesel, gasoline and gas generator sets, and has parameter setting functions.

 

This controller has manual start, stop and AMF functions, and can also realize automatic start and stop control of the unit through remote switches; it uses a dot matrix high-resolution LCD display, which can display multiple parameters and fault status at the same time, and can effectively implement protection and stop when the generator set is not working properly.

 

The controller has built-in display interfaces such as simplified Chinese and English, and the language interface can be customized according to customer requirements. All parameters of the controller can be adjusted through the controller panel buttons, or adjusted and monitored using a PC through the USB interface. It can be widely used in various types of generator set automation systems.

 

u 32-bit high-performance single-chip control;

 

u Dot matrix high-resolution LCD display, with built-in Chinese and English switchable, can customize the language according to customer needs;

 

u PC material key panel, effective waterproof, oil-proof, UV-proof, good operation feel, long service life;

 

u With AMF function, can monitor the mains and power generation status, automatically control the ATS switch;

 

u With USB interface, parameters can be set and real-time monitoring can be performed through the USB interface;

 

u Collect and display parameters such as engine speed RPM, temperature ℃/℉, oil level%, battery voltage V, current running time H, cumulative working time H, etc.

 

u Collect and display generator frequency Hz, voltage V, mains voltage, frequency;

 

u Maintenance countdown and reminder function;

 

u With black box function, it can save the relevant parameters of the unit in real time when the fault alarm occurs, which is convenient for finding the cause of the unit failure;

 

u 5 relay outputs, of which 1 output function is configurable;

 

u 2 switch inputs, configurable functions, nearly 10 functions are optional;

 

u 2 analog inputs, configurable functions, can be selected as sensor input or switch input;

 

u A variety of starting conditions (speed, frequency) combinations are available;

 

u Standard waterproof ring, the panel protection performance reaches IP65 level after installation;

 

u Modular design: All connections are completed through European wiring terminals, and the assembly, connection, maintenance and replacement of the equipment are very easy and convenient;

 

Parameter

 

Working voltage

 

DC8V to 36V continuous power supply

 

Power consumption of the whole machine

 

Standby: 24V: MAX 1W

 

Working: 24V: MAX 2W

 

AC voltage input

 

One-phase two-wire 30VAC-360VAC (ph-N)

 

Engine speed signal range

 

50-9000Hz

 

Maximum cumulative running time

 

9999.9 hours (minimum storage time 6 minutes)

 

Fuel output

 

MAX 1Amp DC + VE power supply voltage output

 

Motor output

 

MAX 1Amp DC + VE power supply voltage output

 

Configurable relay 1

 

MAX 1Amp DC + VE power supply voltage output

 

Generation closing relay

 

MAX 10Amp AC (ph-N) output

 

Mains closing relay

 

MAX 10Amp AC (ph-N) output

 

Switch input

 

Effective when connected to the negative pole of the battery

 

Working conditions

 

-25-65℃

 

Storage conditions

 

-40-85℃

 

Protection level

 

IP65: When a waterproof ring is installed between the controller and the control panel.

 

Insulation level

 

Apply AC2.2kV voltage between the AC high voltage terminal and the low voltage terminal, and the leakage current within 1min is not more than 3mA.

 

Dimensions

 

106mm×86mm×45mm

 

Opening size

 

78mm×66mm

 

Weight

 

0.25Kg