Original Genset Controller DC30TR-ABF Battery Fail Backup Battery Pack Detection

Overview:

This series of controllers is designed for the start, stop, parameter monitoring and fault monitoring of diesel, gasoline and gas generator sets and has parameter setting functions.

 

This controller has manual start and stop functions, and can also realize automatic start and stop control of the unit through remote switches; it uses a dot matrix high-resolution LCD screen, which can display multiple parameters and fault conditions at the same time, and can effectively implement protection and stop when the generator set is not working properly.

 

The controller has built-in display interfaces such as simplified Chinese and English, and the language interface can be customized according to customer requirements. All parameters of the controller can be adjusted through the controller panel buttons, or adjusted and monitored by a PC through the USB port, and can be widely used in various types of generator set automation systems.

 

32-bit imported high-performance single-chip control

Dot matrix high-resolution LCD display, with built-in Chinese and English switchable, can customize the language according to customer needs;

PC material key panel, effective waterproof, oil-proof, UV-proof, good operation feel, long service life;

With USB interface, parameters can be set and real-time monitoring can be performed through the USB interface;

Collect and display parameters such as engine speed RPM, oil pressure kPa/PSI, temperature ℃/℉, oil level%, battery voltage V, current running time H, cumulative working time H, etc.

Collect and display generator frequency Hz, voltage V, current A, power KW, load rate;

Maintenance countdown and reminder function;

With black box function, it can save the relevant parameters of the unit in real time when the fault alarm occurs, which is convenient for finding the cause of the unit failure;

4 relay outputs, of which 2 output functions are configurable;

1 switch input, the function is configurable, and nearly 10 functions are optional;

3 analog inputs, the function is configurable, and can be selected as sensor input or switch input;

0-50mA current transformer secondary input;

A variety of starting conditions (speed, frequency, oil pressure) combinations are available;

Standard waterproof ring, the panel protection performance reaches IP65 level after installation

Modular design: All connections are completed through European wiring terminals, and the assembly, connection, maintenance and replacement of the equipment are very easy and convenient;

Parameters and specifications

Item

 

Working voltage

DC8V to 36V continuous power supply

Total power consumption

Standby: 24V: MAX 1W

Working: 24V: MAX 2W

AC voltage input

One-phase two-wire 30VAC-450VAC (ph-N)

Engine speed signal range

50-9000Hz

Maximum cumulative running time

9999.9 hours (minimum storage time 6 minutes)

Fuel output

1Amp DC + VE power supply voltage output

Motor output

1Amp DC + VE power supply voltage output

Configurable relay 1

1Amp DC + VE power supply voltage output

Configurable relay 2

1Amp Normally open passive output

Switch input

Effective when connected to the negative pole of the battery

Working conditions

-25-65℃

Storage conditions

-40-85℃

Protection level

IP65: When a waterproof ring is installed between the controller and the control panel

Insulation level

Apply AC2.2kV voltage between the AC high voltage terminal and the low voltage terminal, and the leakage current within 1min is not more than 3mA

Dimensions

106mm×86mm×45mm

Opening size

78mm×66mm

Weight

0.25Kg